Same-Day Service · All Brands
Electric Cooktop & Induction Hob Repair in Abu Dhabi
A burner that won't heat, an induction zone that won't detect your pan, unresponsive touch controls, or a cracked glass top — One Click Technicians repairs induction, ceramic, and electric coil cooktops across Abu Dhabi, with a fixed price confirmed before any work starts.
What's Actually Included When You Book
A technician diagnoses the actual fault on-site before quoting a price — an induction hob that "won't detect my pan" could be incompatible cookware, a failed sensor, or a control board fault, and each has a very different cost. Common parts — coil drivers, heating elements, control panels — are carried on the van. Every repair comes with a 90-day workmanship warranty.
What's Actually Wrong With Your Cooktop?
Electric cooktop and induction hob faults fall into a handful of patterns. Here's what we actually find, and roughly what each one costs.
| Symptom | Likely cause | Typical price |
|---|---|---|
| One burner or zone not heating | On induction, usually a faulty coil driver or a connection to the control board. On ceramic or coil stoves, usually the heating element itself has failed. | AED 200 – 450 |
| Induction hob not detecting cookware | Either the pan isn't induction-compatible (a magnet test settles this in seconds), or a coil sensor has failed — worth ruling out the simple cause before booking a repair. | AED 150 – 400 |
| Touch controls unresponsive or erratic | A control panel or PCB fault, sometimes triggered by moisture or a spill finding its way under the touch strip. | AED 250 – 600 |
| Sparking, burning smell, or tripping the breaker | A wiring or element fault serious enough to stop using the appliance immediately and book an inspection the same day. | AED 200 – 550 |
| Cracked or chipped glass top | Depends entirely on whether it's a genuine crack, a chip, or just a scratch — and on induction hobs specifically, a cracked surface sits directly over the coil and touch-sensor electronics, which changes the safety calculus versus a basic stove. | See guide |
| Uneven heating or hot spots | A partially failed heating element (ceramic/coil) or a coil driver running below full power (induction) — still functional, but not for long. | AED 200 – 450 |
| Error code displayed | Varies by brand — Siemens, Bosch, and Neff share largely the same fault-code system, while AEG and Smeg differ. Bring the exact code and we'll confirm on the call. | AED 150 – 500 |
| Won't power on at all | Usually a power supply or main control board fault rather than anything wrong with the cooking surface itself. | AED 200 – 500 |
One burner or zone not heating
AED 200 – 450
On induction, usually a faulty coil driver or a connection to the control board. On ceramic or coil stoves, usually the heating element itself has failed.
Induction hob not detecting cookware
AED 150 – 400
Either the pan isn't induction-compatible (a magnet test settles this in seconds), or a coil sensor has failed — worth ruling out the simple cause before booking a repair.
Touch controls unresponsive or erratic
AED 250 – 600
A control panel or PCB fault, sometimes triggered by moisture or a spill finding its way under the touch strip.
Sparking, burning smell, or tripping the breaker
AED 200 – 550
A wiring or element fault serious enough to stop using the appliance immediately and book an inspection the same day.
Cracked or chipped glass top
See guide
Depends entirely on whether it's a genuine crack, a chip, or just a scratch — and on induction hobs specifically, a cracked surface sits directly over the coil and touch-sensor electronics, which changes the safety calculus versus a basic stove.
Uneven heating or hot spots
AED 200 – 450
A partially failed heating element (ceramic/coil) or a coil driver running below full power (induction) — still functional, but not for long.
Error code displayed
AED 150 – 500
Varies by brand — Siemens, Bosch, and Neff share largely the same fault-code system, while AEG and Smeg differ. Bring the exact code and we'll confirm on the call.
Won't power on at all
AED 200 – 500
Usually a power supply or main control board fault rather than anything wrong with the cooking surface itself.
Got a crack or chip in the glass specifically? Our full cracked induction hob guide covers how to tell it apart from a scratch, whether it's repairable, and real AED costs before you book.
Brands We Repair
Siemens, Bosch, and Neff are the induction hobs we see most often in Abu Dhabi kitchens — they share much of the same underlying platform, so their fault patterns and error codes are closely related. We also carry parts and diagnostic experience across the wider brand range below.
Siemens
iQ-series touch controls & PowerBoost faults
Bosch
Shares much of Siemens' platform and fault patterns
Neff
TwistPad and slider-control faults
AEG
SenseFry and Bridge-zone faults
Smeg
Premium glass and control panel replacements
Miele
See our dedicated Miele hob repair page
Whirlpool
6th Sense induction faults
Electrolux
Hob2Hood and induction sensor faults
Don't see your brand listed? Call to confirm — we cover most brands sold in the UAE, including Hitachi, Hisense, Midea, Beko, Ariston, Zanussi, and Gaggenau.
Electric Cooktop & Induction Hob Repair Cost in Abu Dhabi
Most electrical and element faults fall between AED 150 and AED 600. What moves the price:
What actually failed
A heating element on a basic ceramic or coil stove is a lower-cost swap. An induction coil driver or control board fault costs more to diagnose and replace.
Built-in access
A built-in hob set into a worktop cutout takes longer to access than a freestanding unit — the surrounding counter and cabinetry need care.
Cracked glass is priced separately
Glass-top replacement depends heavily on brand and size, and often on import lead time. See our full cost breakdown before booking a crack repair specifically.
You'll always see the price before we start
A technician diagnoses the actual fault on-site and gives you a fixed number before any work begins.
* Prices are in AED and are typical ranges for residential electric and induction cooktops in Abu Dhabi, inclusive of VAT where applicable. Your exact price is confirmed on-site after diagnosis.
Induction, Ceramic, or Coil — Does It Change the Repair?
All three show up as "the stove isn't working," but what's actually underneath the surface is different for each, which changes both the likely fault and the price.
Induction
Electromagnetic coils and a touch-sensor board sit directly under the glass. Most faults are electronic — a coil driver, a sensor, or the control board — rather than a simple part swap.
Ceramic (radiant)
A resistance heating element under a ceramic-glass sheet. Faults are more often the element itself, which is typically a more straightforward — and cheaper — repair than an induction electronics fault.
Coil / solid plate
Exposed metal elements with no glass surface. The simplest to diagnose and usually the cheapest to repair, since there's no glass or touch electronics involved at all.
Why Cooktops Fail Faster in Abu Dhabi Kitchens
- Voltage fluctuations
- Grid voltage swings during peak demand put real stress on induction control boards — a genuine contributor to the PCB faults we diagnose, more than on simpler coil or ceramic stoves.
- Heavy household usage
- Larger households and homes with domestic staff often run the cooktop for hours a day, well above the duty cycle a mid-range residential unit is designed around — the main driver of early element and coil wear.
- Heavy or rough-bottomed cookware
- Cast-iron and stoneware are common in local kitchens, and both are a leading cause of scratches, chips, and eventual cracks on glass-topped hobs when slid rather than lifted.
Electric Cooktop & Induction Hob Installation
We also fit new electric, ceramic, and induction hobs — the details below are what make the difference between a solid first-time install and a callback.
Induction hobs need a dedicated, higher-capacity circuit
Induction cooking draws considerably more current than a standard ceramic or ordinary electric hob, and almost always needs its own dedicated circuit rather than sharing a socket circuit with other appliances. We confirm the existing wiring can handle this before connecting a new induction hob, especially on a first-time install.
Cutout size isn't fully standardized across brands
Replacing an old hob with a different brand's model sometimes means the new unit's countertop cutout doesn't exactly match the old one. We check this against your worktop before committing to a price, since a mismatched cutout occasionally needs minor countertop adjustment.
Underneath clearance for the connection box
The hob's electrical junction box sits in the cabinet space directly below the countertop cutout — if that space is already used for a built-in oven or drawer, we plan the connection routing before installation day rather than finding out mid-job.
Installation is quoted separately from repair — call for a price once you know whether it's a straight swap or a first-time fit.
Repair or Replace?
A well-maintained induction or ceramic hob typically lasts 8–10 years. Element, coil, and control faults are almost always worth repairing on a unit under 5 years old. Past that, weigh the repair cost against a new hob honestly before committing.
Usually worth repairing
A single element, coil, or control fault on a hob under 5 years old. Mid-range induction hobs run AED 1,800–4,500+ new, so most electrical repairs are a small fraction of replacement cost.
Worth considering replacement
A control board or glass replacement quoted above roughly 60–70% of a new equivalent hob's price, or any repair on a unit already 8+ years old with no other faults history.
For cracked glass specifically, see our repair-vs-replace breakdown for cracked induction hobs, or the general Repair or Replace guide across appliances.
Areas We Cover
We repair electric cooktops and induction hobs across Abu Dhabi. Don't see your area listed? Call to confirm — we likely cover it.
How Booking Works
- 1
Call or book online
Describe the fault, the brand if you know it, and whether there's any visible glass damage.
- 2
A technician arrives, usually same day
Equipped with common parts for a first-visit fix.
- 3
You get a fixed price after diagnosis
Nothing further happens until you say yes.
Frequently Asked Questions
How much does induction hob repair cost in Abu Dhabi?
Do you offer same-day electric cooktop repair?
Why isn't my induction hob detecting my pan?
Do Bosch and Siemens induction hobs fail in the same way?
Which cooktop brands do you repair?
My induction hob has a cracked or chipped glass top — do you fix that?
Is it worth repairing an induction hob that's 8+ years old?
Is there a warranty on the repair?
Do you install new electric cooktops and induction hobs, not just repair them?
Ready When You Are
Book an electric cooktop technician today.
Fixed price confirmed before any work starts. Licensed technicians, 90-day workmanship warranty.
